CONFIG _____L SIDESTICK FAULT
Flight Warning Computer (FWC)
— RESET PROCEDURE—
- Check the PFR.
- If there is no failure message… no action is required.
MEL STATUS: Apply ECAM procedure


CONFIG _____L SIDESTICK FAULT
Flight Warning Computer (FWC)
— RESET PROCEDURE—
MEL STATUS: Apply ECAM procedure

All instructions and limitations given in those documents that relate to the resetting of systems both on the ground and in the air must be respected. No reset should be attempted without a thorough appreciation of the technical ramifications. No more than one computer should be reset at any one time. No reset should be attempted in flight unless specifically permitted by the QRH. Maintenance messages remaining after a reset require engineering investigation.






