FWS _____SDAC 1+2 FAULT
System Data Acquisition Computer (SDAC)
— RESET PROCEDURE—
SDAC1: PULL F02, F04, F05, Q03 & Q04
SDAC2: PULL F03, F05, Q02, Q05 & Q06
Pull CBs for: 2 sec
POST: 5 sec
MEL STATUS: NO DISPATCH
Read me first
All instructions and limitations given in those documents that relate to the resetting of systems both on the ground and in the air must be respected. No reset should be attempted without a thorough appreciation of the technical ramifications. No more than one computer should be reset at any one time. No reset should be attempted in flight unless specifically permitted by the QRH. Maintenance messages remaining after a reset require engineering investigation.
Archive
Categories
- 21 – AIR CONDITIONING A320F
- 21 – AIR CONDITIONING A330
- 22 – AUTO FLIGHT A320F
- 22 – AUTO FLIGHT A330
- 23 – COMMUNICATIONS A320F
- 23 – COMMUNICATIONS A330
- 24 – ELECTRICAL POWER A320F
- 24 – ELECTRICAL POWER A330
- 26 – FIRE PROTECTION A320F
- 26 – FIRE PROTECTION A330
- 27 – FLIGHT CONTROLS A320F
- 27 – FLIGHT CONTROLS A330
- 28 – FUEL A320F
- 28 – FUEL A330
- 29 – HYDRAULIC POWER A330
- 30 – ICE AND RAIN PROTECTION A320F
- 30 – ICE AND RAIN PROTECTION A330
- 31 – INDICATING/RECORDING SYSTEMS A320F
- 31 – INDICATING/RECORDING SYSTEMS A330
- 32 – LANDING GEAR A320F
- 32 – LANDING GEAR A330
- 34 – NAVIGATION A330
- 36 – PNEUMATIC A320F
- 36 – PNEUMATIC A330
- 46 – INFORMATION SYSTEMS A320F
- 47 – INERT GAS SYSTEM A320F
- 49 – AIRBORNE AUXILIARY POWER A320F
- 49 – AIRBORNE AUXILIARY POWER A330
- 52 – DOORS A330
- 71 – (CFMB) – POWER PLANT – GENERAL A320F
- 71 – (RR TRENT 700) – POWER PLANT – GENERAL
- 73 – (RR TRENT 700) – ENGINE FUEL AND CONTROL – GENERAL
- 74 – (RR TRENT 700) – IGNITION – GENERAL
- 75 (RR TRENT 700) – AIR – GENERAL
- 78 (RR TRENT 700) – EXHAUST – GENERAL
- 79 – (RR TRENT 700) – OIL – GENERAL
- 80 – (RR TRENT 700) – STARTING – GENERAL
- AMM REMOVAL/INSTALLATION A320F
- AMM TESTS A320F
- ECAM Warnings A330
- MMEL
- TSM
- TSM A320
- Uncategorized
Recent Posts
Gallery
